Dy-Mark Zinc Guard Cold Galvanising Coating is a zinc rich, high performance, heavy duty corrosion inhibitive primer suitable for use on ferrous metals such as steel, iron and galvanised iron. It contains 99% pure zinc and over 91% metallic zinc pigment in the dry film. It is used extensively in metal fabrication and gives superior galvanic protection to new weld joints. Cold Galvanising Coating conforms to AS3750.9:2009 Type 1. It dries to a matt grey finish. 

Suitable Surfaces: Steel, wrought iron and galvanised iron.

Coverage: Approximately 2m2 per can (depending on the surface and amount of overspray). 

Drying Time: Touch dry in 20 minutes (25°C). Recoat after 1 hour. Hard dry in 16-24 hours. Drying will be slower in cold and humid conditions, in the absence of ventilation or where heavy film build is applied.

Size: 400g Aerosol

Colour: Grey

Finish: Matt

Consistency: Liquid

Propellant: Dimethyl Ether